Description
Proudly made in the USA, Ther bolt pattern spacing is 1-1/4″ from center of hole to center of hole.
This is a Banshee style TM design rear chain guide, this guide was mostly found on almost all aftermarket swingarms.
Thanks. Thanks ATV Rear Chain Guide
Composite machined rear chain guide.
Durable design with a replaceable solid composite wear pad.
For most Aftermarket Swing Arms With Banshee Bolt Pattern.
One piece “Memory Flex” Composite plastic housing.
The solid wear pad makes the guide body stronger to withstand off-road riding & abrasive soils.
Simple bolt on without removing chain if you remove the wear pad.
Chain guide wear pad is Patented in USA under # D532,720.
MADE IN USA
NOTES:
Does not fit Houser arms.
Will not fit with skid plate. You may be able to modify the plate to work.
Aftermarket Swing arms Only With Banshee bolt hole pattern.
Fitment From Parts Finder:
YAMAHA (04-13) RAPTOR 125, 250, 350 (Most Aftermarket Arms)
Also Fits Models Below (Stock & Most Aftermarket Arm)
YAMAHA (87-12) BANSHEE 350
HONDA (86-89) TRX 250R, TRX 300EX & 400EX, TRX 450R with aftermarket swingarms
YAMAHA (04-23) YFZ 450 All Models
YAMAHA (06-23) RAPTOR 700
KAWASAKI (03-14) KFX 400 & 450
For Models Below:
Will fit stock arm but sits 1/2″ lower than RCG-005
YAMAHA (87-06) BLASTER 200
YAMAHA (88-14) WARRIOR 350
Composite machined rear chain guide.
Durable design with a replaceable solid composite wear pad.
For most Aftermarket Swing Arms With Banshee Bolt Pattern.
One piece “Memory Flex” Composite plastic housing.
The solid wear pad makes the guide body stronger to withstand off-road riding & abrasive soils.
Simple bolt on without removing chain if you remove the wear pad.
Chain guide wear pad is Patented in USA under # D532,720.
MADE IN USA
NOTES:
Does not fit Houser arms.
Will not fit with skid plate. You may be able to modify the plate to work.
Aftermarket Swing arms Only With Banshee bolt hole pattern.
Fitment From Parts Finder:
YAMAHA (04-13) RAPTOR 125, 250, 350 (Most Aftermarket Arms)
Also Fits Models Below (Stock & Most Aftermarket Arm)
YAMAHA (87-12) BANSHEE 350
HONDA (86-89) TRX 250R, TRX 300EX & 400EX, TRX 450R with aftermarket swingarms
YAMAHA (04-23) YFZ 450 All Models
YAMAHA (06-23) RAPTOR 700
KAWASAKI (03-14) KFX 400 & 450
For Models Below:
Will fit stock arm but sits 1/2″ lower than RCG-005
YAMAHA (87-06) BLASTER 200
YAMAHA (88-14) WARRIOR 350
There are no reviews yet.