Description
These are new 7/8″bars that will fit most Honda ATC & ATV models that take these 7/8″ bars.
These bars do not have threaded ends or any holes or metal tabs.
The center knurls on these bars will not line up with the clamps of all models. That will not matter as the bars clamp down tight with or without knurls.
These bars will work on most ATVs & ATCs that do not require a cross bar.
Pictures 2-6 show these bars on the widest ATC clamp 6-3/4″ from outside clamp to outside clamp.
This span is found on the 200X, 250R & 350X. The big red & 250SX have a narrower clamp.
| COLOR/FINISH | POWDER-COATED / BLACK |
| BASE COLOR | BLACK |
| FINISH | POWDER-COATED |
| FEATURES | SMOOTH, / NOT DIMPLED / NOT PRE-DRILLED |
| TYPE/BEND | ATV / ATC OEM REPLACEMENT BEND |
| RISE | 3-1/2″ |
| END RISE | 3-1/2″ |
| WIDTH | 29-3/4″ |
| CENTER WIDTH | 6-1/2″ |
| PULLBACK/SWEEP | 4″ |
| HEIGHT | 3-1/2″ |
| HANDLEBAR DIAMETER | 7/8″ |
| CONTROLS DIAMETER | 7/8″ |
| CLAMPING DIAMETER | 7/8″ |
| MATERIAL | STEEL |
There are no reviews yet.